aAbout TARMALAT

Is a powder mixture consisting of non metal minerals, polymers, various resins, pulps, artificial fibers, natural enamels, various additives and different fillers, with, when mixed with water produces a kind of mortar, which is completely flexible and adheres to all surfaces. Executing this compound is very quick, clean and odorless and dust free.

Quick access:

SpecificationCharacteristicTARMALAT

 

 

bTARMALAT has the following specification:

v Omitting the operations of plastering, painting and expedition in exploitation.

v  Clean, quick and easy performances.

v Compatibility and good resistance to  humid and damp climates.

v  Resistance to noise and heat conduction.

 

 

  1.  

v Resisting against fungus growth and lack of any type of contamination.

v Having beauty with a high variety of colors for  use in different architectural setting.

v Very low weight over unit of surface.

v Resists flaking and scratching upon contact with objects. Prevents the appearance of cracks in the building due to minor damage.

v This material is antistatic and prevents the adsorption of dust.

v Conforms to all environmental codes.

v Can be cleaned and washed with common washing agents.

Up

 

 

 

 

cTARMALAT's Technical Characteristic:

Diameter: 2 mm

Weight per One m2: 500 g

Thermal conductivity of the specification for This Diameter: 0.147 W/M.K; Base: ASTM C 518 – 04

Smoke & Flame Developed Classification: B; Between A – D Classes; Base: ASTM E – 84

Endurable Permeable Humidity Balance:  0.95%±1

Minimum Film Temperature Form : 4º c

Up

 

 

 

Bodycote Analysis  

  

dTARMALAT

It could be used in interior ornament.

It could be used only on smooth surfaces and also ceiling surfaces but not on floors.

If it is subject to direct touch of water then it lead to formation a mould. So it can1t be used in places that are subject to probable water leakage.

It is completely repairable and in the case of washing requirement it could be washed using water, sponge and carpet shampoo. Moreover, it doesn1t need to ruling.

There is a possibility for drilling of any kind on this surface.

Depending on moisture and temperature conditions, it requires 12 to 48 to dry and use.

In the case of direct exposure to heat sources, it may encounter to some problems.

If it is smeared by oil, dirt and link, so it could not be cleaned by ordinary detergents. Thus, it must be repaired.

In the case of improved technical properties (i.e., heat and acoustic insulators), it can be applied in multilayer manner.

It is not scabbed by heat and moisture (except for water direct touching) if infrastructure is done well.

In ordinary condition, it is possible to preserve it for 48 hours after mashing. Time is not a problem in dried state.

Up

 

 
 

Main Page | About Company | Crops | Documents

 

                      Performance | Projects | Connect Us
 

Azarpad. Co 2010 | Privacy Policy